- BUMP STOPS- SHOCK & STRUT
- SHOCK EYE BUSHINGS
- SHOCK BOOTS & COIL SPRING ISOLATORS
- SWAY BAR BUSHINGS
- SWAY BAR END LINKS & SET SIZING CHARTS
- TIE DOWN STRAPS
- TIE ROD END DUST BOOTS
- UNIVERSAL #1: Link-Flange Type Bushings, Universal Mounts/Isolators
- UNIVERSAL #2: "Formula 5" Prelube, "Jack Strap", Control Arm Bushing Half Sets, Coil Spring Dampener Donuts, Shock Reservior Isolators
- UNIVERSAL #3: Motor & Transmission Mounts
- CREEPER WHEELS
Universal Products: Sway Bar End Links & Set Sizing Charts
Color Code for end links and sets, add: G- black, R- red. Example- # 9.8106R = red
|
Performance Polyurethane End Link Components
PLEASE NOTE: For the maximum performance benefit from the products shown on this page–use with the performance polyurethane Sway Bar Frame Bushing Components found on the following page: |
|
Performance Polyurethane End Links, Grommets Only- Made ofHYPER-FLEX™Performance Polyurethane. PLEASE NOTE: Refer to the specific vehicle page for your vehicle for the proper O.E.M. / stock style sway bar end link set part number BEFORE choosing the end link set from this page. |
|
| For Cars & Mini Trucks- 8 per set. | I.D.- 3/8", Nipple O.D.- 5/8", O.D.- 1" | 9.8106 |
| For Full Size Trucks- 4 per set. | I.D.- 7/16", Nipple O.D.- 7/8", O.D.- 1 1/4" | 9.8103 |
|
Performance Polyurethane End Link Set, Grommets and Washer Set- Made ofHYPER-FLEX™Performance Polyurethane. PLEASE NOTE: Refer to the specific vehicle page for your vehicle for the proper O.E.M. / stock style sway bar end link set part number BEFORE choosing the end link set from this page. |
|
| Fits most domestic cars, mini trucks and import models that use a conventional style end link system. Set includes: 8 grommets and 8 heavy gauge washers. |
I.D.- 3/8", Nipple O.D.- 11/16", O.D.- 1 1/8" |
9.8105 |
|
Performance Polyurethane End Link Complete Sets- Made ofHYPER-FLEX™Performance Polyurethane. Complete end link set includes: firm durometer polyurethane bushings, zinc plated 3/8" grade-5 bolts, "nylock" nuts and heavy gauge washers. Use this chart only when our specific vehicle pages do not display applications for this item. |
|
Vehicle must be on level ground or service lift (NOT jacked up, NOT wheels hanging and NOT having the suspension unloaded). Wheels should support the vehicle or lift jacks should support the suspension as if the wheels are supporting it. Make sure stabilizer bar end eyelet (B) is parallel with the control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure sleeve length (A) and compare to the chart to find the correct set. |
|
(A) |
Set Number |
| 1" | 9.8122 |
| 1 5/8" | 9.8120 |
| 2" | 9.8123 |
| 2 3/8" | 9.8125 |
| 2 5/8" | 9.8117 |
| 2 7/8" | 9.8118 |
| 3 3/8" | 9.8119 |
| 3 9/16" | 9.8124 |
| 4 1/4" | 9.8149 |
| 4 1/2" | 9.8121 |
