Universal Products: Bump Stops- Shock and Strut

Performance Polyurethane Shock & Strut Bump Stops
4.6103 7.6104 9.6109 9.6110 9.6111
Fits many Ford cars 1979-99. Front position with 7/8" shaft diameter.
1 7/16" tall,
2 3/16" O.D., 7/8" I.D.
2 per set. 		Fits most 1970-78 Nissan cars with 3/4" shaft diameter.
1 3/4" tall, 2" O.D., 3/4" I.D.
2 per set.		 Fits many McPherson strut style and standard shock absorbers with 11/16" dia. shaft.
1 9/16" tall, 1 1/2" O.D., 11/16" I.D.
2 per set.		 Fits many McPherson strut style and standard shock absorbers with 5/8" dia. shaft.
1 3/16" tall, 1 1/2" O.D., 5/8" I.D.
2 per set.		 Fits many McPherson strut style and standard shock absorbers with 1/2" dia. shaft.
1 1/4" tall, 1 3/8" O.D., 1/2" I.D.
2 per set.
10.6101 16.9101 16.9102 9.9101 9.9103
Fits many McPherson strut style and standard shock absorbers with 5/8" diameter shaft.
2 3/16" tall, 2 1/4" OD x 5/8" ID.
2 per set.		 Fits many McPherson strut style and standard shock absorbers with 12mm dia. shaft.
1 9/16'' tall, 2'' OD x 12mm ID.
2 per set.		 Fits many McPherson strut style and standard shock absorbers with 12mm dia. shaft.
2'' tall, 1 3/4'' OD x 12mm ID.
2 per set. 		All purpose bump stop for control arms, traction bars & leaf springs. Designed to be easily trimmed. 2 1/8" tall, 2" dia.
2 per set. 		Smaller general purpose bullet shaped bump stop, fits many control arms.
1 9/16" tall, 1 1/2" dia.
2 per set.
9.9121 9.9132 9.9102 9.9116 9.9117
Low profile button head bump stop. 11/16" tall, 1 5/8" dia.
2 per set. 		Ultra low profile button head bump stop. 3/8" tall, 2" dia., 1" long stud.
2 per set. 		Low profile button head bump stop for limited suspension height, such as control arms on mini trucks. 11/16" tall, 2" dia.
2 per set. 		Button head bump stop 1" tall, 2" dia.
2 per set. 		Flat head bump stop. 1" tall, 2" 15/16" dia.
2 per set.
9.9138 9.9135 9.9143 9.9118 9.9119
Round head bump stop.
1 7/8" tall, 2 1/4" dia. Designed to accept 1/2" dia. socket head bolt. Hardware not included.
2 per set. 		Stepped style stop. 2 1/2" tall, 2 7/16" dia. Designed to accept 3/8" dia. socket head bolt. Hardware not included. Easily trimmed for custom fitting.
2 per set. 		Stepped style stop. 3 1/8" tall, 2 7/16" dia. Designed to accept 3/8" dia. socket head bolt. Hardware not included. Easily trimmed for custom fitting.
2 per set. 		Low profile rectangular bump stop. 7/8" tall, 1 7/8" long X 1 3/8" wide.
2 per set. 		Rectangular bump stop.
1 3/8"" tall, 2 3/8" long X 2" wide.
2 per set.
9.9136 9.9150 9.9151 3.9102 3.9101
Square tapered style bump stop. 2" tall X 2" square.
7/8" long stud.
2 per set. 		G.M. style bump stop. Fits many 1970-99 G.M. cars & trucks. 2" tall X 2 1/4" long X 1 1/16" wide. 1" long stud with a 5/16" dia. locating pin at 1" offset.
2 per set. 		Round pull -thru bump stop. Fits many G.M. vehicles 1970-99. Also fits 9/16" hole (1/8" thick) 1 9/16" tall X 1 13/16" dia.
2 per set. 		G.M. style pull-thru bump stop. Fits many 1978-01 G.M. RWD cars and trucks. 1 1/4" tall, 1 1/2" long X 1 9/16" wide.
2 per set. 		G.M. style pull-thru bump stop. Fits many 1978-88 G.M. RWD cars and trucks. 2 5/8" tall X 1 13/16" long X 1 15/16" wide.
2 per set.
3.9103 9.9154 2.9101 9.9137 9.9109
G.M. style pull-thru bump stop. Fits many 1978-88 G.M. RWD cars and trucks. 1 5/8" tall X 1 13/16" long X 1 15/16" wide.
2 per set. 		Single hump early GM style bump stop. Lower control arm bump stop direct replacement for: 1964-72 Chevelle, 1968--72 Nova and 1968-69 Camaro. Replaces OEM part no. 402410. 1 1/8" wide, 2 1/2" long, 1 11/16" tall.
2 per set. 		Jeep style bump stop. Fits 1997-03 Jeep Wrangler. Must reuse all metal parts.
2 per set. 		2 bolt style, fits 1976-86 Jeep CJ5, 7 front & rear position 1 7/8" tall X 5" overall length X 1 3/4" wide. Designed to accept 3/8" dia. bolts with center to center of
4 1/4" max. to 4" min. Hardware not incl.
2 per set. 		Low profile competition style bump stop. 2 1/2" tall, 4 1/2" long X 2 1/2" wide.
2 per set.
   
9.9104 9.9148 9.9149    
Designed with a large reinforced metal plate welded to a mounting plate and molded-in.
4 1/2" tall,
4 1/2" long,
2 1/2" wide.
2 per set. 		Flat head pad 3/4" tall X
2 3/4" dia. Designed to accept 5/16" dia. socket head bolt. Hardware not included. Not to be used as a control arm or axle bump stop.
2 per set. 		Button head pad 3/4" tall X 2" dia. To accept 3/8" dia. socket head bolt. Hardware not included.Not to be used as a control arm or axle bump stop. 2 per set.    

buy kamagra in the uk