(1) With oval front bushing
(2) Must reuse existing outer metal shells
(3) Lowers must use existing outer metal shells
(4) 1-3/8” O.D. Front Lower
(5) 1-5/8” O.D. Front Lower
(6) With all round bushings
(7) Uppers only
(8) Lowers only
(9) Mono leaf spring
(10) Multi leaf spring
(11) 1.90” O.D. rear lower
(12) 1.65” O.D. rear lower
(13) Included in front control arm bushing set
(14) Except heavy duty suspension
(15) With heavy duty suspension
(16) 1980-82
(17) 1983-87
(18) 1-7/16” O.D. lower
(19) 1-9/16” O.D. lower
(20) 1975-79 Crew Cab only
(21) 1974 only
(22) 1975-77
(23) Front lowers must reuse existing outer shells
(24) Uppers must reuse existing outer shells
(25) Except 426 and 440 models
(26) 426 and 440 models
(27) 1965-72
(28) 1973-76
(29) Greaseable Frame Bushings
(30) 1973-74 only
(31) 1955 only
(32) 1956-57 only
(33) Except convertible
(34) Convertible only
(35) Fits 1/2” shackle bolts-9/16” use 4-2123
(36) Extended cab only
(37) Blazer only
(38) Does not include frame shackle bushings
(39) 1971-76 Celica only
(40) Aftermarket springs except Superlift and Skyjacker
(41) 1976-79
(42) 1988-91 Crew Cab only
(43) 15/16” bar
(44) 1965 only
(45) 1988 only
(46) 1970-72 Monte Carlo use 3-4134
(47) Police, taxi, race car recommend firmer durometer set #3-4136
(48) Yukon & Tahoe only
(49) Includes trailing arm bushings
(50) Sport pkg. only
(51) With aftermarket shackles
(52) For 7/8” O.D. bar only
(53) G20 1973-87 only
(54) Monte Carlo only
(55) 1973 thru ‘82 P-10 has uppers only use set #3-3114
(56) 14 piece set
(57) Must reuse all metal parts
(58) Uppers must reuse all hardware
(59) Except Crew Cab
(60) El Camino only
(61) Z24 only
(62) 1” eye only
(63) 1962-65 only
(64) G.T. & Monza use 3-3141
(65) 1985 thru ‘88 4Runner use 8-4102
(66) Includes strut bushings
(67) With oval rear lower bushing
(68) Except 4 door sedan
(69) Except station wagon
(70) GSR & Del Sol VTEC will use one half of the set
(71) Grand Prix only
(72) 2 Boots per package - See page for more information
|
(73) Lowers must reuse all metal parts
(74) 2 Door hard top
(75) Crew cab only
(76) Extra cab only
(77) Suburban only
(78) With single upper control arm
(79) With two upper control arms
(80) Track bar with both ends same I.D. (1 1/8”) use 3-7112
(81) All with 2” main eye & 5/8” bolt
(82) 1966 thru ‘76 only
(83) 1981 thru ‘86 CJ8 only
(84) Fits 1 1/2” O.D. rod eye -- If strut rod has been replaced with 1 3/4” rod eye use 3-7102
(85) 1989-91 only
(86) 1969 & 70 with V-8 -- use 3-3151
(87) 10 bolt rear end only -- for 12 bolt use 3-3132
(88) SVO use 4-3135
(89) Standard Cab only
(90) GTS 8-3112
(91) With 4000 lb. rear axle
(92) 1972 thru ‘85 pickup truck only
(93) Ramcharger only
(94) Falcon only
(95) Except Cobra with I.R.S.
(96) Fits GM# 14048947 (LH) & 14048948 (RH) arms (strut eyes some size each end)
(97) Fits GM# 10098131 (LH) & 10098132 (RH) arms (strut eyes different size each end)
(98) 2 wheel drive
(99) 4 wheel drive
(100) With 2 1/2” I.D. main eye & 2 1/2” wide spring
(101) 1978 thru ‘93 vehicles only
(102) Included in sway bar set
(103) V6 engine requires crossmember modification
(104) Sway bar end link bushings and hardware included
(105) With 1 3/4" I.D. main eye & 2 1/2" wide spring
(106) Does not include 1999-01 new body Silverado
(107) Except Type "R"
(108) Not including diesel engine
(109) Except 1971-76 wagon
(110) Police, taxi, or tow package
(111) Includes front sway bar bushings
(112) Except MK III & IV
(113) With manual transmission
(114) With oval main eye bushing
(115) Allison transmission only
(116) 1983-88 only
(117) Except Muncie M40 auto. trans.
(118) Except sport suspension with rear vertical bushings
(119) 1988 only
(120) 1977-81 only
(121) V6 engine only
(122) 2 1/2" main eye O.D.
(123) Includes Sway Bar End Link Bushings
(124) Stamped arm with bolt-on rear stub strut
(125) Stamped arm with bolt-on rear eye
(126) For street performance
(127) For racing performance only
(128) With torsion bar front suspension
(129) With 1 7/8" O.D. shackels (shackel bushings only)
(130) 1963-64 seat belt cushions only
(131) 1999 model to 3/'99 only
(132) Core support position only
(133) 1963-75 with 1" hole in core support
(134) Must re-use outer metal shell at differential end
(135) For body mounts only 4.4101, for hardware only 4.4106
(136) Requires extended shocks
(137) Except offroad package
(138) 1500 Only |
