Still, need help finding the right bushing

[strangevw]

Hello & greetings, looks like my initial posting fell thru the cracks, so here goes again and hopefully I get some answers this time;  I am restoring a rare vw, its a 74 vw 412. It has track control arms in the front and the original bushings are naturally cooked and are NLA. Looking at Energy suspensions extensive product line, I got hopefull as many bushings looked pretty close but the measurements are not always listed. So, here is what I need: its a bushing very similar to ES p/n 13.3101 described as 30mm OD. The ideal bushing for my application would be similar in configuration, and measuring 30mm OD, 65mm Long (w/o flanges) , or 32mm  x 2 pieces also fine, and 12mm ID. Any help would be greatly appreciated, not only by me but also by another 30-40 desparate restorers. Many thanks

[Kossak]

strangevw,

Your question has been noted and we are looking into it.  Please note that we will be at the SEMA show in Las Vegas this week and unable to answer any questions untill the week of November 10th.  Sorry for the inconvenience.

[strangevw]

Nate, thank you for your reply. I am in no rush and will wait with much hope. Enjoy Vegas