Need recommendation for an engine mount pad

[Yegster]

I am looking for a 3/4 - 1" tall spacer that is 2-2 1/2" in diameter. Center to accommodate a 3/8-5/16" screw. 9.9149 is close but it appears that the top portion of the pad will collapse under the weight of the engine to something around 1/2". 9.9148 is close with the exception of it being a bit to large in diameter - and on the low end of the height spec. The lower piece of 9.4102 looks to be perfect, but I don't know if it is available as a separate part number - 13/16 x 2 1/2".

[url]http://farm5.static.flickr.com/4009/4291890684_9d09055728_m.jpg/url]
[img]http://farm5.static.flickr.com/4009/4291890684_9d09055728_m.jpg/img]


As I hope you can see in the photo above, the rubber deteriorates over time and is unsightly. I know your product will be a huge improvement in appearance and durability.

Thanks for looking for a production application that will work. 

[EnergyGeek]

suspension.com has many universal bodymount sets that may be what your looking for, check them out.

[liufang898186]

Wow! I’ve never heard of this before and I think they’re awesome!